Following on from my previous posting, I think I had better explain my request for any further information on this lantern, such as where it was commonly found, and more importantly if any exist today?
Well,
I think I can answer the latter question, for the very good reason that I believe I am now the proud owner of one.
uni1a.JPG [ 335.88 KiB | Viewed 17996 times ]
I came across it on eBay quite unintentionally a little while ago. It was listed as a "wartime munitions factory industrial light", and had apparently been salvaged from a mill in North Manchester. When I saw the photo, something seemed familiar with the cast canopy. I contacted the seller to confirm what the shade was made of - "plastic, I think" was the answer. The light had been subject to some cleaning up, however everything including the important refractor is in fine condition.
Obviously, with the huge industry now churning out some quite realistic repro "vintage" lighting, I wanted to be absolutely sure that this was the genuine article.
Hence the request for your help.
Anyway, having still drawn a bit of a blank in this respect, I have decided to pop some pics of the lantern. It is certainly an uncommon specimen, which might be why it is struggling to get some recognition from the lantern collectors out there!
The first thing to say about the Eleco 'Universal 100' is its size. If you compare it to my later HW838 "Ware", it is far more compact design.
uni7a.JPG [ 310.2 KiB | Viewed 17996 times ]
It still employs the 1" BSP threaded entry, however you will notice the main casting is a tapered hexagonal design, common to the previous incarnation of both the Ware and Letchworth lanterns.
uni2aa.jpg [ 258.22 KiB | Viewed 17996 times ]
The reduced size of the canopy will no doubt be one of the sacrifices to produce such an economically priced lantern...
...along with the "Perspex" machined tubular refractor.
uni3a.JPG [ 378.5 KiB | Viewed 17996 times ]
The use of "Perspex" or Poly (methyl methacrylate), was not necessarily new to Eleco at this time, as their GoldenRay Mk lll had used it a little earlier in 1953.
It would however have been big news to produce a reliable ring refractor, without the need for expensive and vulnerable glassware. Mine is fitted with an "open" style refractor, however an enclosed version was also offered by Eleco.
The "Perspex" tube is retained via 3 screws into a cast alloy ring, which has three keyhole slots machined on its top flange.
uni6a.JPG [ 385.06 KiB | Viewed 17996 times ]
Each slot engages with a large slot head screw in the canopy lip, which is then tightened home.
uni4a.JPG [ 430.89 KiB | Viewed 17996 times ]
A standard porcelain B22 lampholder is fitted inside.
uni5a.JPG [ 382.52 KiB | Viewed 17996 times ]
There is no adjustment for focusing as it was designed for a 100W GLS lamp. A separate earth terminal screw is provided close by.
Suffice it to say, I think the lantern is too good to use outside, however it has found a new home - fitted with a 4W GLS LED bulb, it serves as my handy desk lamp (on a Stanton 7A swan neck bracket).
uni8a.JPG [ 191.68 KiB | Viewed 17996 times ]
If you know of any examples of the Eleco 'Universal 100' still in existence, I would be interested to hear from you.
Surely, they were used somewhere?